Tool
| Parameter |
Meaning |
Default value |
Units |
| Feed |
Default feed on Z axis (speed with which drill penetrates the laminate) |
200 |
mm/min |
| Speed |
Value of speed parameter passed to the machine controller for milling operation (PWM width of control pulse in case of Cirqoid machines) |
1390 |
ms |
Heights
| Parameter |
Meaning |
Default value |
Units |
| Clearance |
Default value of clearance – the height above the board, the program uses to move the drill between holes |
5 |
mm |
| Safety height |
Default value of safety height – the height above the board, where drill switches from rapid descend to feed |
2 |
mm |
| Z offset |
Z axis offset – Z coordinate in machine coordinate system when inserted drill is slightly above laminate |
|
mm |
| Working height |
The depth of the hole (this should be slightly more than laminate width, to take into account angle at the end of the drill) |
-2 |
mm |
All heights are specified in work coordinate system (i.e. taking into account Z offset).