Settings - Dispensing
Needle
| Parameter | Meaning | Default value | Units |
|---|---|---|---|
| Needle diameter | Default needle diameter | 0.4 | mm |
Timing
| Parameter | Meaning | Default value | Units |
|---|---|---|---|
| Prefeed pause | Duration of pause inserted after the valve is opened and before needle starts to move | 0.02 | sec |
| Postfeed pause | Duration of pause inserted after the needle is finished dispensing and before it is retracted | 0.2 | sec |
| Bleeding duration | Duration of valve opening on bleeding screen | 0.5 | sec |
Feed
| Parameter | Meaning | Default value | Units |
|---|---|---|---|
| Feed | Default feed (speed with which needle moves during dispensing) | 100 | mm/min |
Heights
| Parameter | Meaning | Default value | Units |
|---|---|---|---|
| Clearance | Default value of clearance – the height above the board, the program uses to move the needle between pads | 5 | mm |
| Z offset | Z axis offset – Z coordinate in machine coordinate system when needle is slightly above laminate | mm | |
| Working height | Height of the needle relative to laminate surface during dispensing | 0 | mm |